Strengthening the foundations of buildings and lifting the foundations
It would seem that there could be nothing more reliable than the ground beneath your feet...
Lifting slabs and foundations sometimes requires a combination of different technologies, demonstrating the flexibility and broad range of solutions for convenient and effective results.
Leveling and supporting industrial buildings, floors, and driveways
Factory and warehouse buildings, floors (slabs), and driveways can deteriorate due to a loss of bearing capacity in the foundation. Most settlement issues can be resolved quickly and economically through the injection of expanding resin, without interrupting your operations. This process, often called slab or foundation lifting, is fast and clean: no excavations, no water or foreign materials, no cement dust, no mess — unlike traditional concrete methods. You won’t have to wait several days for new concrete to dry. Your forklifts, pallet jacks, and trucks can operate in the work area just 30 minutes after Uretek injection is completed.
Moving or settled slabs and foundations can be reinforced, leveled, and preserved, as long as they haven’t completely collapsed. In complex situations, our experienced technicians can advise on what can be saved and what needs replacement.
Uretek’s proprietary lifting and reinforcement process helps mitigate the effects of soil loosening by creating a load-bearing soil mass or support polymer columns “anchored” to stable ground. The pressure from the expanding resin compresses and consolidates the surrounding soil until it can no longer resist the counterforce.
Resin injections for deeper soil reinforcement and foundation strengthening
Historically, Uretek used only deep injection processes, where resins were introduced via long tubes to various depths in the ground. For over five years, the company has employed resin and soil densification technologies. Building on this experience, we developed and refined a “column injection” technology to improve soil conditions and level structures and buildings overall. Under certain soil conditions, the bearing capacity can be increased by up to 500%.
Uretek’s soil improvement and settlement remediation technologies are based on the expansive power of multi-component geopolymer mixtures. Leveraging our experience in lifting, leveling, and restoring load-bearing structures, as well as correcting foundation soil issues, combined with our knowledge of unique local conditions, the company can guarantee successful solutions even in the most challenging cases.
Leveling and supporting industrial buildings, floors, and driveways
Factory and warehouse buildings, floors (slabs), and driveways can deteriorate due to a loss of bearing capacity in the foundation. Most settlement issues can be resolved quickly and economically through the injection of expanding resin, without interrupting your operations. This process, often called slab or foundation lifting, is fast and clean: no excavations, no water or foreign materials, no cement dust, no mess — unlike traditional concrete methods. You won’t have to wait several days for new concrete to dry. Your forklifts, pallet jacks, and trucks can operate in the work area just 30 minutes after Uretek injection is completed.
Moving or settled slabs and foundations can be reinforced, leveled, and preserved, as long as they haven’t completely collapsed. In complex situations, our experienced technicians can advise on what can be saved and what needs replacement.
Uretek’s proprietary lifting and reinforcement process helps mitigate the effects of soil loosening by creating a load-bearing soil mass or support polymer columns “anchored” to stable ground. The pressure from the expanding resin compresses and consolidates the surrounding soil until it can no longer resist the counterforce.
Resin injections for deeper soil reinforcement and foundation strengthening
Historically, Uretek used only deep injection processes, where resins were introduced via long tubes to various depths in the ground. For over five years, the company has employed resin and soil densification technologies. Building on this experience, we developed and refined a “column injection” technology to improve soil conditions and level structures and buildings overall. Under certain soil conditions, the bearing capacity can be increased by up to 500%.
Uretek’s soil improvement and settlement remediation technologies are based on the expansive power of multi-component geopolymer mixtures. Leveraging our experience in lifting, leveling, and restoring load-bearing structures, as well as correcting foundation soil issues, combined with our knowledge of unique local conditions, the company can guarantee successful solutions even in the most challenging cases.
Methods that work and evolve. The polymer evolution of the cement and concrete era.
Don’t face this challenge alone. Get as much information as possible to make an objective decision. From our experience, 2 out of 3 clients who contact us choose to carry out an inspection and review the recommendations.
Don’t put it off — trust the experience and professionalism of our team, and we will help you save and restore what matters to you.
Don’t put it off — trust the experience and professionalism of our team, and we will help you save and restore what matters to you.
If you’ve reached this section, it means you are ready to take responsibility for the future of your property. We value your care and invite you to take the first step toward saving your valuable asset that is undergoing deterioration. However, don’t rush your decision — your well-being and safety matter.
Start with a minimally required inspection of your building at a reasonable cost to avoid risks and make an informed decision. By obtaining a clear picture of the scale of the problem, you will be able to decide on the next steps. You have three options:
Start with a minimally required inspection of your building at a reasonable cost to avoid risks and make an informed decision. By obtaining a clear picture of the scale of the problem, you will be able to decide on the next steps. You have three options:
Carefully monitor the progression of damage using professional tools, identifying the “point of no return”
Develop a solution plan taking into account structural, financial, and practical constraints, and implement it
Seek alternative solutions from third parties based on the conducted inspection
Risks caused by foundation deformation and damage:
Damage to communications that are laid under or near load-bearing structures;
Damage to the building's internal communications;
Damage to load-bearing walls, partitions, and ceilings;
Повреждение систем водоотведения;
Damage to the pavement and external buildings;
Shortening the life of the building;
Pre-emergency condition and the need for unscheduled major repairs;
Inconvenience of building operation and life-threatening conditions;
Heat loss and mold are caused by damaged waterproofing.
What happens to a building or structure?
What caused the cracks or structural displacements?
Is there any point in waiting for improvements or changes, and what kind of changes are we talking about?
Is a cosmetic repair sufficient, and for how long?
What will happen if I don't do anything, and by when?
Will "store-bought or do-it-yourself" solutions help, and what exactly?
Will the "familiar foreman" be able to solve the issue?
Is it possible to slow down or stop the destruction process?
Is it possible to return to the previous state? What are the options?
When is the best and cheapest time to start solving it? Or can it be done later?
What can you get for X rubles?
How much does the solution cost, and what are the implementation conditions?
Questions Uretek can answer:
No demolition or removal works required
International expertise and database of projects
Work warranty and safety from 5 to 60 years
Long‑term stable polymer resin
Visible and instrumentally verifiable results
Custom material and technical solution design for each project
Results immediately after work completion
Suitable for different types of structures
Environmentally neutral technology and waste disposal
Increases service life and property value
Approved international technologies
Brand history and technological development since 1978
No demolition or removal works required
International expertise and database of projects
Work warranty and safety from 5 to 60 years
Long‑term stable polymer resin
Visible and instrumentally verifiable results
Custom material and technical solution design for each project
Results immediately after work completion
Suitable for different types of structures
Environmentally neutral technology and waste disposal
Increases service life and property value
Approved international technologies
Brand history and technological development since 1978
By contacting URETEK, you will be able to:
-
Figure out what's going on -
Increase the operating time of the facility -
Make an informed and well-considered decision for yourself -
Take control of the asset's condition -
Stop the loss of asset value -
Choose the most suitable way to implement the solution
Completed projects
Almost instant results
Choosing and defining the appropriate solution together with the client
Only top brands of equipment and tools
The possibility of implementing the project in stages according to the client's required schedule
Post-project monitoring and promptness in case of necessary improvements. 24/7 communication
Parallel improvement of the characteristics of hydro-, heat- and vibration insulation of structures
We guarantee:
5 year
minimum warranty on completed work
0,5 mm
precision of the performed work
2-3 days
for completing a standard project
material curing time
18 sec
savings compared to other technologies
25%
NAVIGATION
services