Lifting of concrete foundations and floors during uneven precipitation
Visible and effective Uretek enhancement in front of your eyes
Advances in structural lifting and leveling for buildings and facilities have created cost-effective and less invasive alternatives to traditional methods of reinforcement and restoration. For builders and facility managers, Uretek resins can be used as a solution to improve the properties of foundation soils, enabling lifting and leveling of floors, walls, and foundations of existing buildings and structures.
Soil reinforcement can also help avoid the need for foundation replacement or rebuilding sections of residential buildings during renovation or reconstruction, while providing additional load-bearing capacity to structures.
Uretek resins, when designed and applied via injection, act like precise surgical interventions, delivering localized and efficient solutions. This modern “two-in-one” approach simultaneously improves foundation conditions and re-levels entire buildings or specific parts, such as floors and walls, filling voids and minimizing soil deformation potential.
Uretek techniques inject resin under load without dismantling structures, using a fast, precise, and controlled method. With Uretek, it is possible to lift and level strip foundations, floor slabs, and support slabs resting on soil, as well as access roads and paved areas.
Uretek resins have been used for over 40 years, with a proven track record. Today, they are internationally recognized as one of the most advanced methods for enhancing soil bearing capacity and lifting structures, offering high efficiency and speed in problem-solving.
Problems may arise when construction works – from low-rise housing to multi-story residential and commercial buildings – are carried out without proper project planning and thorough study of construction conditions. Defects such as cracks in walls and floors or sinking foundations are signs of serious structural issues, which can appear or worsen if the soil’s bearing capacity is not restored to the required level.
At the same time, Uretek resins can be used in a variety of environments, including complex engineering solutions for civil infrastructure, residential, mining, commercial, and industrial buildings. Despite its effectiveness, project solutions using Uretek resins remain a relatively unfamiliar approach for many participants in the construction market.
Soil reinforcement can also help avoid the need for foundation replacement or rebuilding sections of residential buildings during renovation or reconstruction, while providing additional load-bearing capacity to structures.
Uretek resins, when designed and applied via injection, act like precise surgical interventions, delivering localized and efficient solutions. This modern “two-in-one” approach simultaneously improves foundation conditions and re-levels entire buildings or specific parts, such as floors and walls, filling voids and minimizing soil deformation potential.
Uretek techniques inject resin under load without dismantling structures, using a fast, precise, and controlled method. With Uretek, it is possible to lift and level strip foundations, floor slabs, and support slabs resting on soil, as well as access roads and paved areas.
Uretek resins have been used for over 40 years, with a proven track record. Today, they are internationally recognized as one of the most advanced methods for enhancing soil bearing capacity and lifting structures, offering high efficiency and speed in problem-solving.
Problems may arise when construction works – from low-rise housing to multi-story residential and commercial buildings – are carried out without proper project planning and thorough study of construction conditions. Defects such as cracks in walls and floors or sinking foundations are signs of serious structural issues, which can appear or worsen if the soil’s bearing capacity is not restored to the required level.
At the same time, Uretek resins can be used in a variety of environments, including complex engineering solutions for civil infrastructure, residential, mining, commercial, and industrial buildings. Despite its effectiveness, project solutions using Uretek resins remain a relatively unfamiliar approach for many participants in the construction market.
Confidence instead of hope and expectation
Don’t face this challenge alone. Get as much information as possible to make an objective decision. From our experience, 2 out of 3 clients who contact us choose to carry out an inspection and review the recommendations.
Don’t put it off — trust the experience and professionalism of our team, and we will help you save and restore what matters to you.
Don’t put it off — trust the experience and professionalism of our team, and we will help you save and restore what matters to you.
If you’ve reached this section, it means you are ready to take responsibility for the future of your property. We value your care and invite you to take the first step toward saving your valuable asset that is undergoing deterioration. However, don’t rush your decision — your well-being and safety matter.
Start with a minimally required inspection of your building at a reasonable cost to avoid risks and make an informed decision. By obtaining a clear picture of the scale of the problem, you will be able to decide on the next steps. You have three options:
Start with a minimally required inspection of your building at a reasonable cost to avoid risks and make an informed decision. By obtaining a clear picture of the scale of the problem, you will be able to decide on the next steps. You have three options:
Carefully monitor the progression of damage using professional tools, identifying the “point of no return”
Develop a solution plan taking into account structural, financial, and practical constraints, and implement it
Seek alternative solutions from third parties based on the conducted inspection
Risks caused by foundation deformation and damage:
Damage to communications that are laid under or near load-bearing structures;
Damage to the building's internal communications;
Damage to load-bearing walls, partitions, and ceilings;
Повреждение систем водоотведения;
Damage to the pavement and external buildings;
Shortening the life of the building;
Pre-emergency condition and the need for unscheduled major repairs;
Inconvenience of building operation and life-threatening conditions;
Heat loss and mold are caused by damaged waterproofing.
What happens to a building or structure?
What caused the cracks or structural displacements?
Is there any point in waiting for improvements or changes, and what kind of changes are we talking about?
Is a cosmetic repair sufficient, and for how long?
What will happen if I don't do anything, and by when?
Will "store-bought or do-it-yourself" solutions help, and what exactly?
Will the "familiar foreman" be able to solve the issue?
Is it possible to slow down or stop the destruction process?
Is it possible to return to the previous state? What are the options?
When is the best and cheapest time to start solving it? Or can it be done later?
What can you get for X rubles?
How much does the solution cost, and what are the implementation conditions?
Questions Uretek can answer:
No demolition or removal works required
International expertise and database of projects
Work warranty and safety from 5 to 60 years
Long‑term stable polymer resin
Visible and instrumentally verifiable results
Custom material and technical solution design for each project
Results immediately after work completion
Suitable for different types of structures
Environmentally neutral technology and waste disposal
Increases service life and property value
Approved international technologies
Brand history and technological development since 1978
No demolition or removal works required
International expertise and database of projects
Work warranty and safety from 5 to 60 years
Long‑term stable polymer resin
Visible and instrumentally verifiable results
Custom material and technical solution design for each project
Results immediately after work completion
Suitable for different types of structures
Environmentally neutral technology and waste disposal
Increases service life and property value
Approved international technologies
Brand history and technological development since 1978
By contacting URETEK, you will be able to:
-
Figure out what's going on -
Increase the operating time of the facility -
Make an informed and well-considered decision for yourself -
Take control of the asset's condition -
Stop the loss of asset value -
Choose the most suitable way to implement the solution
Completed projects
Almost instant results
Choosing and defining the appropriate solution together with the client
Only top brands of equipment and tools
The possibility of implementing the project in stages according to the client's required schedule
Post-project monitoring and promptness in case of necessary improvements. 24/7 communication
Parallel improvement of the characteristics of hydro-, heat- and vibration insulation of structures
We guarantee:
5 year
minimum warranty on completed work
0,5 mm
precision of the performed work
2-3 days
for completing a standard project
material curing time
18 sec
savings compared to other technologies
25%
NAVIGATION
services